LTE indoor design for Finland Pavilion v4

lihsh3cf

Introduction

Capacity requirement
About 10 PC for demo on the 2/F and 3/F
2 different sectors are planned for 2/F and 3/F to meet capacity requirement
Initial study on link budget suggests that LTE and HSPA are quite similar. So the planning concept is copied from WCDMA indoor planning
Standalone DAS for LTE but support future integration of GSM and WCDMA system
MIMO is supported by eNB and terminal
Minimum Coupling Loss (MCL)
For 20MHz bandwidth, noise floor + noise fig = -100dBm
Min UE Tx power = -40dBm (3GPP 36.101)
Therefore, MCL should be > 60dB