VOIP产品mg3000－T4

meisihai

MG3000－T4设备Trace设置方法

工程服务部 2009-8-19

1、首先通过串口或者telnet命名连接到T4设备上，如下图：
===================================================================
===================================================================
=========

=========
=========
MG3000-T4 Trunk Gateway User Console
=========
=========
=========
=========
V1.0
=========
=========

=========
=========
GoHigh Data Networks TechnologyCo.,Ltd.
=========
=========
=========
=========
All Right Reserved
=========
=========

=========
===================================================================
===================================================================



Login: root
Password: ****
输入正确的root密码（默认密码为root）

2、成功登陆后的界面如下，此时您已经在T4设备的命令行模式，输入help可以看到当前目录下可实行的命令和目录情况，使用cd命令可以切换目录。
----------- Welcometo Use
MG3000-T4
-----------

MG3000-T4:\>
MG3000-T4:\>
MG3000-T4:\> help

Commands( use 'help<command>' for more information):

h
-- help
dispaly help information

c
-- cd
change current directory

!
-- !
execute one piece of history command

.
-- history
display the last 20 history commands

d
-- date

set or display system date and time

save -- savecfg
save the configuration toflash

This is the toplevel set of commands and directories.

Subdirectories:

b
-- billing

c
-- conference

sip
-- sip


m

-- media

n
-- number

o
-- office

oam
-- oam

p
-- pstn

s
-- statistic

t
-- trace

u
-- user

Commands:

l
--logout
exit console

ch
-- commandhierarchy
display the command tree structure

csc
-- cfgsysclock
configure
the system clock
please enter anykey for more......

dsc
-- displaysysclock
display the system clock status

csn
-- cfgsysname
configure
the system name

dsn
-- displaysysname
display
the system name

cwp
-- cfgwebconsoleport
configure web console port

dwp
--displaywebconsoleport
display webconsole port

csna -- cfgsysnetattrib
configure
the system net attrib

dsna -- displaysysnetattrib
display
the system net attrib

ver
-- version
display software version

The command hasbeen completed successfully!

3、切换到trace目录下设置以下两个trace（标注红色字体的为需要手动输入的命令）。
MG3000-T4:\> cd trace

The command hasbeen completed successfully!

MG3000-T4:\Trace>
MG3000-T4:\Trace>st

Please input tracemodule index

(0-all, 1-timer, 2-rm, 3-cnsl, 4-ec,

5-rdt, 6-bkup, 7-snmp, 8-tlnt, 9-updt,

10-trap, 11-cc, 12-pstn, 13-sip, 14-vm,

15-dpram, 16-hdlc, 17-trunk, 18-trace)
The index: 13

trace type:

(0-all, 1-task, 2-message, 3-isr, 4-callstack,

5-memory, 6-timer, 7-primitive, 8-normal)
Please input tracetype, <Enter> means no more : 2

Please input tracetype, <Enter> means no more :

Please input tracelevel(1~5): 4

Please input traceoutput mode (1-console, 2-LAN): 2

The command hasbeen completed successfully!

MG3000-T4:\Trace>st

Please input tracemodule index

(0-all, 1-timer, 2-rm, 3-cnsl, 4-ec,

5-rdt, 6-bkup, 7-snmp, 8-tlnt, 9-updt,

10-trap, 11-cc, 12-pstn, 13-sip, 14-vm,

15-dpram, 16-hdlc, 17-trunk, 18-trace)
The index: 12

trace type:

(0-all, 1-task, 2-message, 3-isr, 4-callstack,

5-memory, 6-timer, 7-primitive, 8-normal)
Please input tracetype, <Enter> means no more : 2

Please input tracetype, <Enter> means no more :

Please input tracelevel(1~5): 2

Please input traceoutput mode (1-console, 2-LAN): 2

The command hasbeen completed successfully!

4、开始拨打电话，并将trace输出保存到一个文本文件中发给大家分析；

5、切换到Statistic目录下，实行drcr命令查看通话记录
MG3000-T4:\Trace> cd

The command hasbeen completed successfully!

MG3000-T4:\> cd statistic

The command hasbeen completed successfully!
MG3000-T4:\Statistic>drcr
|seq|caller|addr(ts)|called|ts(addr)|signal|media|call_time|talk_time|end_time|stop|cause|
|2|62303100|192.216.6.7|131114|0.1|n|full|16:43:38|ignore|16:43:38|pstn|503/34|
|1|62303100|114|n|full|16:43:38|ignore|16:43:38|cc|0/0|

The command hasbeen completed successfully!

MG3000-T4:\Statistic>

6、停止trace（若不停止trace会造成设备运行不稳定，请在停止抓trace退出前切记关闭trace）
MG3000-T4:\Trace>rt

The command hasbeen completed successfully!

MG3000-T4:\Trace>