C114门户论坛百科APPEN| 举报 切换到宽版

亚星游戏官网

 找回密码
 注册

只需一步,快速开始

短信验证,便捷登录

搜索
查看: 2346|回复: 0

ospf III lsa [复制链接]

军衔等级:

亚星游戏官网-yaxin222  列兵

注册:2021-5-20
发表于 2021-12-14 16:34:56 |显示全部楼层
debugging(查看抢占过程)
  • 由于DR和BDR为非抢占方式,根据设备配置的先后顺序可能导致DR为先启动的设备。
  • DR和BDR是根据接口选举的
    • DR优先级越大越优先
    • 优先级相等时,route-id越大越优先




<R3>terminal debugging
Info: Current terminal debugging is on.
<R3>terminal monitor
Info: Current terminal monitor is on.
<R3>debugging ospf 1 event
<R3>sy
Enter system view, return user view with Ctrl+Z.
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]undo shut
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:21-08:00 R3 %%01IFPDT/4/IF_STATE(l)[6]:Interface GigabitEthern
et0/0/0 has turned into UP state.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:21-08:00 R3 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:21.143.4-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802c Line: 1295 Level: 0x20

  OSPF 1: Intf 10.0.123.3 Rcv InterfaceUp State ` Down -> Waiting. `
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:21.143.5-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802c Line: 1409 Level: 0x20

  OSPF 1 Send Hello Interface Up on 10.0.123.3
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:55-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:55-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:55.73.3-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1136 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv HelloReceived State  ` Down -> Init ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:55.73.4-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1732 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv 2WayReceived State ` Init -> 2Way ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:56-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.0.10, Neighb
orEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:56.393.2-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1136 Level: 0x20

  OSPF 1: Nbr 10.0.123.2 Rcv HelloReceived State Down -> Init.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:58-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighb
orEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:58.653.3-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1732 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv AdjOk? State ` 2Way -> ExStart ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:58.653.4-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802c Line: 2096 Level: 0x20

  OSPF 1 Send Hello Interface State Changed on 10.0.123.3
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:22:58.653.5-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802c Line: 2107 Level: 0x20

  OSPF 1: Intf 10.0.123.3 Rcv WaitTimer State ` Waiting -> DR ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:03-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.0.10, Neighb
orEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:03-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.0.10, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.0.10, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:04-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.123.0.10, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:03.923.1-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1732 Level: 0x20

  OSPF 1: Nbr 10.0.123.2 Rcv 2WayReceived State Init -> ExStart.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:03.963.1-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1845 Level: 0x20

  OSPF 1: Nbr 10.0.123.2 Rcv NegotiationDone State ` ExStart -> Exchange ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:04.13.1-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1957 Level: 0x20

  OSPF 1: Nbr 10.0.123.2 Rcv ExchangeDone State ` Exchange -> Loading `.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:04.13.2-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 2356 Level: 0x20

  OSPF 1: Nbr 10.0.123.2 Rcv LoadingDone State  ` Loading -> Full ` .
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighb
orEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exc
hange)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09.633.2-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1845 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv NegotiationDone State ExStart -> Exchange.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09.683.1-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 1957 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv ExchangeDone State Exchange -> Loading.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09.683.2-08:00 R3 RM/6/RMDEBUG:
FileID: 0xd017802d Line: 2356 Level: 0x20

  OSPF 1: Nbr 10.0.123.1 Rcv LoadingDone State Loading -> Full.
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighb
orEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadi
ng)
[R3-GigabitEthernet0/0/0]
Aug  5 2021 10:23:09-08:00 R3 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.123.0.10, Neighb
orEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[R3-GigabitEthernet0/0/0]



举报本楼

您需要登录后才可以回帖 登录 | 注册 |

手机版|C114 ( 沪ICP备12002291号-1 )|联系大家 |网站地图  

GMT+8, 2024-11-24 12:24 , Processed in 0.231387 second(s), 15 queries , Gzip On.

Copyright © 1999-2023 C114 All Rights Reserved

Discuz Licensed

回顶部
XML 地图 | Sitemap 地图