亚星游戏官网-yaxin222

门户 | 手机客户端 | 论坛 | 人才 | 百科 | 搜索 | 技术问答 | English
已解决问题
[求助]诺基亚五代、六代基站的功耗  (进入论坛模式)
提问者:wujl_sunny   |  提问时间:2012-1-9 17:44
因工作需要,向各位达人求诺基亚五代、六代基站的功耗,先谢谢了!
关闭所有答案回应     最佳答案
粘的乱了,下doc看吧,有点乱,我也没编辑了。
EDGE:
BTS power consumption
The BTS power consumption depends on the input voltage, the ambient temperature and the traffic load. The following values are calculated for operational configurations with a 2-way uplink diversity (all TRXs transmitting at full power in all timeslots):


Site configuration
Combining method
Power consumption (W)
  Frequency band
  800 and 900
1800
1900
1+1
By-pass
480
520
540
2+2+2
By-pass
1055
1160
1220
8+8+8
4-way
3795
4215
4455
Table 15: Power consumption of Flexi EDGE BTS with 2-way uplink diversity




----------------------------------------------------------------------------------------------------------------------------------------------------
MCPA:
BTS power consumption
The total BTS level consumption is comprised of the following ‘blocks’:
亚星游戏官网-yaxin222亚星游戏官网-yaxin222
Figure 14: BTS level power consumption ‘blocks’
(*) Fixed consumption excluding the impact of variable fan speed
(**) Varies depending on "per TRX power" setting and the number of active time slots
The total BTS level power consumption can be estimated by adding up these blocks:
    ESMx consumption (including the FIxx transmission card)
    RF Module idle consumption (with no RF output)
  • Branch (or pipe) level consumption

The branch level consumption varies for different configurations and depends on factors such as "per TRX power" setting and number of active time slots.
BTS heat dissipation can be estimated by subtracting total TX power from total BTS intake power.
The BTS power consumption figures given below are measured under the following conditions:
    Based on the measurements taken with random units of ESMB, ESMC, FXDA, and FXEA modules of version A.101 with EX3.1 MP1.0 BTS SW.
    Power Level (PL) =0 (maximum power), room temperature, dedicated 2G mode with GMSK modulation, 54 VDC power supply, Optimized Cooling profile (default).
    Measurements done in BTS Network Mode (under BSC control), TCH TRX(s) activated via 2G Flexi BTS Site Manager menu ‘Test’ and ‘TRX Continuous Transmission’ (activates all timeslots).
    The RF Module idle consumption measured when BTS (sector) or BCF object is locked on BSC.
  • Fans rotating at typical speed at room temperature. The maximum fan speed can increase module level power consumption by 20 W.

亚星游戏官网-yaxin222
The following BTS level power consumption values are an estimate and a tolerance of ±10% compared to a real measured value is expected.
For examples of calculating power consumption or heat dissipation, see table [url=]Examples of power consumption calculations[/url].
Note that the [letters] such as [A] in the table [url=]BTS power consumption[/url], are used for examples given in the table [url=]Examples of power consumption calculations[/url].

RF Module

Configuration / Branches (or pipes)
Nominal idle power consumption per RF Module/ RRH
Additional power consumption per branch (on top of idle consumption)
All timeslots (TS) active on selected TRX
BCCH
BCCH + some TCH TRX(s)
BCCH + all TCH TRXs



FXDA (900)
472083A.101

60 W
1 TRX



150 W [A]

240 W (1x60W)
NA



240 W [E]

30 W
1...2 TRXs
175 W (1x30W)
NA
20 W
1...3 TRXs
155 W (1x20W) [C]

195 W (2x20W)
15 W
1...4 TRXs
135 W (1x15W)
170 W (2x15W)
12 W
1...5 TRXs
130 W (1x12W)
185 W (3x12W)
10 W
1...6 TRXs
120 W (1x10W) [D]

170 W (3x10W)



FXEA (1800)
472084A.101

60 W
1 TRX



155 W


255 W (1x60W)
NA



255 W


30 W
1...2 TRXs
175 W (1x30W)
NA
20 W
1...3 TRXs
150 W (1x20W)
195 W (2x20W)
15 W
1...4 TRXs
135 W (1x15W)
170 W (2x15W)
12 W
1...5 TRXs
120 W (1x12W)
175 W (3x12W)
10 W
1...6 TRXs
115 W (1x10W)
160 W (3x10W)
  
System Module
Power consumption
ESMB (with FIxx transmission card)
50 W [F]

ESMC (with FIxx transmission card)
80 W
Table 25: BTS power consumption

Examples of calculating power consumption using values provided in the BTS power consumption table
Configuration
BTS level power consumption / heat dissipation
1+1+1 BCCH only (60 W, 20 W, 10 W) with 1xFXDA and 1xESMB
Power consumption = [A] + + [C] + [D] + [F]
= 150 + 240+ 155+ 120 + 50 = 715 W
1+3+5 (60 W+20 W+10 W) configuration with 1xFXDA and 1xESMB
Power consumption = [A] + 3X[E] + [F]
= 150 + 720 + 50 = 920 W
1+1+1 BCCH only (3x10 W) with 1xFXDA and 1xESMB
Power consumption = [A] + 3x[D] + [F]
= 150 + 360 + 50 = 560 W
3+3+3 (all 20 W) with 1xRFM and 1xESMB
Heat dissipation = (A + 3xE + F) - (9x20W)
= 920 W - 180 W = 740 W
Table 26: Examples of power consumption calculations
 |  回应该答案 (0)  |  回答时间:2012-2-14 17:14
其他答案 ( 3 条 )
六代站
诺西2G六代站
[size=10.5pt] [/size]
 |  回应该答案 (0)  |  回答者:冷雪风   |  2012-2-8 12:13
 |  回应该答案 (0)  |  回答者:tl5201314   |  2012-3-12 15:46
 本来想来回答的。但看到高手在那不好露手啊!!惭愧惭愧!
回应该答案 (0)  |  回答者:1337304404   |  2012-8-27 08:42
热点问题
XML 地图 | Sitemap 地图